If the humidity in the kitchen is high and the smoke exhaustion is not good, it is easy to cause oil pollution on the customized circuit board of the hot pot induction cooker, corrode electronic components, damage the circuit insulator, cause a short circuit, and cause a fire hazard. Therefore, the kitchen should be kept clean and pay attention to ventilation. In terms of shape, the main features and process processing of each piece of furniture in the set of furniture are required to be consistent, such as leg shapes, drawers, cabinet door handles, etc. showing relatively consistent shapes and processing methods, so that different furniture have common image factors. become a set of furniture.

In terms of color, the paint color of the set furniture must be consistent. The paint surface should be rich in color, fresh and pleasing to the eye, and the paint film should be flat, light, bright, feel good, not sticky, no foaming, wrinkling, defects and different shades of coloring etc. phenomenon. After the induction cooker is heated, the heat will quickly concentrate on the bottom of the pot, and the oil temperature in the pot will rise rapidly.

In terms of materials and workmanship, it is necessary to emphasize rationality and consistency. Check from the frames, panels, side panels and other parts, and comprehensively use plywood and fiberboard according to the stress conditions. The texture of the face should be consistent, and the plywood should not be degummed or loose. , The joints are tight and there is no uneven phenomenon; the mortise and tenon are precise, the structure is firm, not deformed or cracked; the cabinet door opens freely, closes tightly, and does not warp; the drawer is flexible and in place.

    After the induction cooker of the hot pot induction cooker manufacturer has been used for a period of time, it is easy to get stains on the panel. If it is not cleaned in time and becomes stubborn oil stains, it will take some effort. The noise of the hot pot induction cooker may be because the pot does not meet the requirements. If the pot is too thin, it will cause the high-speed vibration of the bottom of the pot to produce a sudden sound.

The sound of water boiling caused by the price of hot pot induction cooker is too high. Due to the special material of some pots, the power of the induction cooker will increase, and a very loud boiling sound will be generated when the water is boiling. It can be solved by lowering the gear. To wipe the panel of the induction cooker, wipe it with decontamination powder or neutral detergent, and then wipe it with a damp cloth. If the buildup is heavy, you can wipe it with toothpaste, and then wipe it with a soft damp cloth. Be careful, do not wipe the stove surface with cold water immediately after use, so as to avoid the heat and cold, which will cause the panel to crack.